产品中心
蒙自LIMESTONE - GYPSUM FLUE GAS DESULFURIZATION ( FGD ) TECHNOLOGY
类别：
产品描述
According to the actual situation of cement kiln, the traditional limestone - gypsum desulfurization process was improved.adding turbulence ring, dehydrator and rectifier equipment developed a set of high desulfurization efficiency, export without droplets, and higher quality gypsum wet desulphurization technology, has been successfully applied in several cement kiln, including the desulfurization system after processing,As a result, the export emission concentration can be accurately controlled within 35mg/Nm³, and the desulfurization efficiency can reach more than 98%. The obtained by-product gypsum has excellent quality, and the moisture content is within 15%. For the export fog drops, its emission is less than 50mg /Nm³, and the technical indexes are in the leading level in China.
4000+2500t/d kiln inlet desulphurization system <limestone - gypsum method>
Flue gas volume
| Inlet SO₂ | 2500mg/Nm³ |
| Outlet dust content | 20mg/Nm³ |
| Desulfurization efficiency | 98% |
OR MORE
| Gypsum moisture content | 12% |
| Outlet mist droplets | <50mg/Nm³ |
2x2500t/d kiln Inler desulphurization system
Flue gas volume
| Inlet SO₂ | 2000mg/Nm³ |
| Outlet dust content | 25mg/Nm³ |
| Desulfurization efficiency | 98% |
OR MORE
| Gypsum moisture content | 1% |
Address
CNBM New Tech Center,intersection of Huanghe Road and Liaoning Road,Hefei,China.
Contact
Tel：+8617775301530 or +8613909697265
E-mail：ZYEP@hcrdi.com
Get Connected
Copyright © ZYEP Powered by：www.300.cn SEO Business license